在国内外学术期刊发表论文数十篇，被SCI、EI检索50多篇。
代表性论文有：
(1) Automatic visibility evaluation method for application in virtual prototyping environment. Weiwei Wu, Xiaodong Shao*, Huanling Liu, International Journal of Computer Integrated Manufacturing, 2019, 32(10), SCI检索；
(2) An experimental and numerical investigation of heat transfer enhancement in annular microchannel heat sinks. Liu, Huan-ling， Qi, Dong-hao， Shao, Xiao-dong*， Wang, Wei-dong， INTERNATIONAL JOURNAL OF THERMAL SCIENCES，2019，142. SCI检索；
(3) Evolution of cyclic thermal stress in selective laser melting of 316L stainless steel: a realistic numerical study with experimental verification. Peiying Bian， Jing Shi， Xiaodong Shao*， Jingli Du. The International Journal of Advanced Manufacturing Technology，2019，104（9）. SCI检索；
(4) Finite element analysis of thermal stress and thermal deformation in typical part during SLM. Bian, Peiying， Shao, Xiaodong*，Du, Jingli. Applied Sciences. 2019， 9(11), SCI检索；
(5) Heat transfer performance of a novel multi-baffle-type heat sink. Cao Xin, Liu Huan-ling*, Shao-xiao-dong*. Enthopy, 2018, 20(12): 979，SCI检索；
(6) 一种针对动态观测物的可视性自动评估方法. 武维维，邵晓东*. 计算机集成制造系统, 24(4). 2018. EI检索；
(7) 基于多目标遗传算法的虚拟人作业姿态仿真方法. 武维维, 叶林梅、邵晓东*，刘焕玲. 计算机集成制造系统, 2019, 25(01):159-168. EI检索；
(8) 一种基于分阶式力引导的自动装配定位方法. 武维维, 邵晓东*, 刘焕玲. 计算机集成制造系统, 2018, 24(10). SCI检索；
(9) 激光选区熔化AlSi10Mg表面微弧氧化及其耐磨耐蚀性. 边培莹，邵晓东*，杜敬利. 中国表面工程， 2018. 131(1): 88~94. EI检索；
(10) A descriptive semantics of modelling process catering for whole product parametric. Ge XiaoBo, Shao XiaoDong*, Li Shen,Wang Dou. Advanced Engineering Informatics. 2017 v32，P299-311. SCI检索；
(11) Assembly Sequence Planning for Reflector Panels Based On Genetic Algorithm and Ant Colony Optimization[J]. Wang Dou, Shao Xiao-dong*, Liu Si-meng. International journal of advanced manufacturing technology, 2017, 91(1-4): 987-997. SCI 检索；
(12) A Hybrid technology for Assembly Sequence Planning of Reflector panels. Wang Dou, Shao Xiao-dong, Ge Xiao- bo, Liu Si-meng. Assembly automation 2017, 37(4):442-451. SCI 检索；
(13) Simulation of the deformation caused by the machining cutting force on thin-walled deep cavity parts. Liu Si-meng1, Shao Xiao-dong*, Ge Xiao-bo, Wang Dou. International Journal of Advanced Manufacturing Technology 2017, 92(9-12): 3503–3517. SCI 检索；
(14) 基于混合算法的反射面天线面板装配序列规划. 王豆, 邵晓东, 刘焕玲, 葛晓波. 计算机集成制造系统, 2017, 23(6): 1243-1252. EI检索；
(15) 薄壁深腔零件铣削加工误差仿真分析. 刘思濛，邵晓东，王豆，葛晓波. 计算机集成制造系统, 2017, 23(9): 1860-1868. EI检索；
(16) Enhancing fidelity of virtual assembly by considering human factors. Wei Gao, Xiao-Dong Shao*, Huan-Ling Liu. International Journal of Advanced Manufacturing Technology. 2016 83(5-8) P: 873-886. SCI检索；
(17) 一种基于框架模型的产品整机建模规则描述语义. 葛晓波,邵晓东*, 仇原鹰,李申. 计算机集成制造系统, 2016, 22(1):232-240. EI检索；
(18) 一种基于动力学分析的薄壁深腔零件加工变形仿真方法. 刘思濛，邵晓东*，王豆. 计算机集成制造系统, 2016, 22(10): 2294-2304. EI检索；
(19) 一种大型反射面天线面板装配变形仿真方法. 王豆, 邵晓东*, 刘思濛. 计算机集成制造系统, 2016, 22(11)：2542-2550. EI检索；
(20) 基于粒子波的自动装配定位方法. 邵晓东 ，高巍，刘焕玲. 计算机集成制造系统 2014,20（7）. EI检索；
(21) 基于随机有限元方法的机械结构可靠性评估. 张红旗, 邵晓东*, 胡祥涛, 周红桥, 夏丹, 苏春. 东南大学学报, 2014, 44(1): 76-81. EI检索；
(22) 基于自适应检测线的碰撞检测算法. 邵晓东，高巍，刘焕玲. 计算机集成制造系统 , 2013 v19(12),, p 3147-3154. EI检索；
(23) Virtual assembly planning and assembly-oriented quantitative evaluation of product assemblability. Wei Gao, Xiaodong Shao*, Huanling Liu . International Journal of Advanced Manufacturing Technology, 2014,71(1):483–496. SCI检索；
(24) Simulation of Workpiece Deformation Caused by Releasing the Clamping Force. Xiao-Dong Shao, Si-Meng Liu, Liu Zhang, Zhao-Xu Lin. The Transactions of The Canadian Society for Mechanical Engineering, 2014, 37(3):703-712. SCI检索；
(25) IPSO-based hybrid approaches for reliability-redundancy allocation problems. HongQi Zhang, XiangTao Hu, XiaoDong Shao*, ZiCheng Li, YuHui Wang. Science China Technological Sciences, 2013, V56(11), pp 2854-2864. SCI检索；
(26) 一种基于力引导的装配定位方法研究. 高巍 ，邵晓东*，刘焕玲，葛晓波. 计算机集成制造系统, 2013, 19(10), P:2407-2416. EI 检索。
(27) 一种基于特征的快速装配方法. 邵晓东，殷磊，陆源，陈锋. 计算机集成制造系统, 2007,13(11),P:2217-2223. EI检索.